Description
Fluke FTPL-1 FuseTest Probe with Test Lead
Key features
- Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating
- Fluke fuse part number 803293
- Probes allow indication of live voltage even with blown fuse*
- 2 mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads
- TL224 leads are right angle connector on one end and straight connector on the other with reinforced strain reliefs, 1.5 meter silicone – insulated wire resists heat and cold
- Operating temperature – 20 °C to 50 °C (-5 °F to 120 °F)
- CAT III 1000 V, CAT IV 600 V, 10 A rating
- One year warranty
*Voltage readings with blown fuse are approximate and vary with the meter impedance. Before and after each measurement, verify presence of blown fuse by checking continuity of the fused test probe. Current mode is non-functional with blown fuse.
If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes ship with the Fluke TL224 silicone test leads. Rated to CAT III 1000 V, these probes have removable tip guards for reduced probe tip exposure.
Related Products
Fluke TP1-1 Test Probes
Fluke
£35.23
Inc. VAT
£28.64
Ex. VAT
Fluke TP1-1 Test Probes
Key features
One pair of slender probes (red, black) with hard stainless steel tips for probing closely spaced or recessed terminals. The flat blade design securely holds...
Fluke FTP-1 Fused Test Probe
Fluke
£185.96
Inc. VAT
£151.19
Ex. VAT
Fluke FTP-1 Fused Test Probe
Key features
Built in fuses for additional measurement protection
Fluke fuse part number 803293, 1000 V, 11 A with 20 kA interrupt rating
Probes allow indication...
Fluke TLK290 Test Probe Kit
Fluke
£114.12
Inc. VAT
£92.78
Ex. VAT
Fluke TLK290 Test Probe Kit
Key features
Test probe set to be used on motor and three phase sockets
Probes have flexible test points that fits securely between 4 and 8 mm sockets
For use with 4 mm...
Fluke TL80A-1 Test Lead Set
Fluke
£146.52
Inc. VAT
£119.12
Ex. VAT
Fluke TL80A-1 Test Lead Set
Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL80A Basic Electronic Test Lead Kit has the...
Fluke TL71-1 Test Lead Set
Fluke
£56.36
Inc. VAT
£45.82
Ex. VAT
Fluke TL71-1 Test Lead Set
Key features
Comfort grip probes with right-angle test leads, equipped with WearGuard™ indicator for damage detection
Silicone-insulated leads have superior flexibility...
Fluke H900 Test Lead Holder
Fluke
£57.76
Inc. VAT
£46.96
Ex. VAT
Fluke H900 Test Lead Holder
Key features
Heavy duty construction with mounting holes
Holder has 10 slots for wires up to 8 mm in diameter
Over-all dimensions: 27.9 cm L x 8.9 cm W x 3.2 cm H
One...
Fluke TLK281-1 Automotive Test Lead Kit
Fluke
£269.09
Inc. VAT
£218.77
Ex. VAT
Fluke TLK281-1 Automotive Test Lead Kit
Complete set of test and measurement accessories designed especially for automotive specialists. Use the sharp stainless steel probes to contact the wire...
Fluke TL75 Test Lead Set
Fluke
£47.90
Inc. VAT
£38.94
Ex. VAT
Fluke TL75 Test Lead Set
Key features
Single unit combining a test lead and probe, measuring 48 inches (1.22 meters) in length
PVC-insulated probes, ensuring secure and accurate measurements
CAT II...
Fluke TLK 291 Fused Test Probe Set
Fluke
£119.75
Inc. VAT
£97.36
Ex. VAT
Fluke TLK 291 Fused Test Probe Set
One pair (Red, Black) fused Test Probes. Designed to meet GS38 specs for United Kingdom.
Specification
1000 V CAT III According to IEC 61010-031
Current...